posted 01-31-2003 03:50 PM
I'm looking through all of my old CD's. I think I've found a bunch of old skins and maps and whatnot, I'll sort through them and post them in a bit.
Posts: 2802 | From: Michigan | Registered: Jul 1999 | IP: Logged
posted 01-31-2003 04:40 PM
Working in it there's a lot to sort through. I found Hal 9000's Old map pack, now I'm going through skins.
Posts: 2802 | From: Michigan | Registered: Jul 1999 | IP: Logged
posted 01-31-2003 05:35 PM
Quick explanation of my configuration: ESDF for movement Shift run Space Jump Mouse 1 - Fire Mouse 2 - Crouch Mouse 3 - Use Item MouseWheel - Scroll Items W - Zoomin R - Rocketjump (Jump + Fire) G - Hold and release to toss grenade
posted 01-31-2003 05:37 PM
I also just noticed, I must have recomipled pak9.pak It's not only Hal's Mappack, but my fav. 3 crosshairs, crusher and massive demos, and a few more maps.
posted 02-01-2003 03:31 PM
Look at what your cl_maxfps is set at. It defaults to 90, could you have set it lower for some reason?
Posts: 2802 | From: Michigan | Registered: Jul 1999 | IP: Logged
posted 02-01-2003 06:34 PM
It's not our cl_maxfps. I know Cy and I have it much higher than 60. It's set on that server somehow. I saw some message on the server.
posted 02-02-2003 10:00 AM
No, it didn't have anything to do with the server. I got that number when running it in SP on my computer. I'd think maybe there's a max fps setting somewhere that I missed. But Cy gets the same result ???
--------------------
No Sig
Posts: 2128 | From: Cascade MI USA | Registered: Jun 1999 | IP: Logged
posted 02-02-2003 10:57 AM
I get the same thing also. The readme.txt with the crusher says something about disabling v ync otherwise you won't ever get framerates higher then your montitor refresh rate. That sound feasible, just got to figure out how to do that now.
posted 02-02-2003 11:08 AM
I went into my video card settings and changed vertical sync to "off by default" and set cl_maxfps to 200 and my FPS doubled. I haven't done any other "tweaking" though. I have a GeForce4 4200Ti and the setting was in advanced->additional properties-> OpenGL settings....your video card menu will probably be different to mine but good luck. By the way, my card's setting was for vertical sync to be ON by default.
posted 02-03-2003 02:08 AM
I remeber that setting you maxfps at 35 is supposed to help your connection. When people got better hardware with slow connections (modem, 1 channel ISDN) too many fps could chocke the connection, so much graphics data was being transmitted that you would just lagg out.
Posts: 3036 | From: Turku, Finland | Registered: Jul 1999 | IP: Logged
UBBFriend: Email this page to someone!
posted 01-31-2003 03:50 PM
posted 01-31-2003 05:00 PM
